Forums  

Go Back   Forums > Electronic Diagnostic Forum.

Reply
 
Thread Tools Display Modes
  #1  
Old 12-03-2012, 10:30 PM
omitech's Avatar
omitech omitech is offline
Junior Member
 
Join Date: Oct 2009
Posts: 15
Default Renault Clio 08 plate, boot door wont open.

Hi everyone, any ideas where to start .
Renault Clio 08 plate, boot door wont open or lock with blip, we have it up and checked wiring from gate to roof, it looks ok.

We are just not sure what to try next, any help would be great thanks Omitech.
Reply With Quote
  #2  
Old 12-03-2012, 11:09 PM
Gibbmodoll Gibbmodoll is offline
Administrator
 
Join Date: Oct 2009
Location: Madley in Herefordshire Uk.
Posts: 458
Default

Hi Omitech, how are you, nice to hear from you again , think we can help on this one, we have had trouble with this.
Lift up the tail gate and under the gate is a switch with rubber over it, it should click on and off with your finger.

Remove it it's just a switch with two little pins, test with ohm meter, switch held in, switch out, one way should read zero ohm or close to, other way open.

You can also try this, add a paper clip to the two pins in the loom end and try locking and unlocking with the blip, if it works the switch is open and wont close.

You can remove the bottom of the switch, 4 tags, you may find water in it, and a poor con, clean and it could well be fine .
Let us know how you get on.
Gibbmodoll.
__________________
All the best Gibbmodoll.
(Gibbins Motors Technology and Gibbmodoll Uk Group).
The more you know, the less you know.
Here is one more great site run by the Group,

http://www.uklovedollforums.co.uk/home.php
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 05:12 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.