Forums  

Go Back   Forums > Faults We Find On Car Management Systems.

Reply
 
Thread Tools Display Modes
  #1  
Old 23-02-2012, 07:15 PM
Gibbmodoll's Avatar
Gibbmodoll Gibbmodoll is offline
Administrator
 
Join Date: Oct 2009
Location: Madley in Herefordshire Uk.
Posts: 473
Angry P0234 on Audi A3 2.0 TDI 07 plate.

In this thread we will take a look at code P0234 and how to deal with it.

first of all your scan tool may come up with on info for this code, the Audi code is 00564 and is in fact Turbocharger TC engine boost condition limit exceeded.

Note, this code is also used for the supercharger.

When i say the complaint is that the turbo will close down, switch off and the turbo will start to boost again, some of you will know what to do.

Here is a run down of how and what to test, the fault canbe many things but start with the tubo wastgate test first.

The code is that the boost is out of it's range at times, take a note of whan and how the ecm is closing down the turbo, and how quick and at what speed.

Remove the under tray and the pipe from the wastgate actor, fit a vacuum pull gauge.



Look for full movement of the turbo arm, without any jurking, you should also have vacuum hold, pump vacuum to around 18 hg min:, the full movement should be at around 15 hg, and the arm should fully return at zero.

In this case there was no movement and the car will need a new turbo .
__________________
Gibbins Motors Technology Uk

The more you know the less you know!!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 10:00 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.